Filter the list by product size.
| A (mm) |
B (mm) |
C (mm) |
e (mm) |
f |
n (mm) |
g (mm) |
h (mm) |
N1 |
R |
d (mm) |
L1 (mm) |
M1 |
d / L |
Max. Slide Weight (kgf) |
Product Code |
Price |
Stock |
3D |
Add to Cart |
|
38
|
19
|
16
|
31.5
|
24.89
|
24
|
34.5
|
10
|
25.5
|
8
|
6
|
8.5
|
M5 x11
|
6 x 30
|
10
|
MTB38 |
|
|
|
|
|
54
|
32
|
20
|
43
|
34.93
|
36.5
|
46
|
14.5
|
38
|
10
|
8
|
10.5
|
M6 x 14
|
8 x 40
|
20
|
MTB54 |
|
|
|
|
|
86
|
45
|
30
|
67
|
53.98
|
49.5
|
70
|
22.5
|
51
|
12
|
10
|
17
|
M8 x 18
|
10 x 60
|
40
|
MTB86 |
|
|
|
|
Precise, with lock, align, pin and spring
The body of "MTB" can not be deadlock with retainer screws, need some hole or cavity to limitless motions. This unit is for limitless motions.
It can be mounted with 90° dowel pin.
The pin position and opening side of slide block must be in the same direction.
MTB can be used as "Latch Lock" mentality if there is no any special request on the system of the mould closing.
Practice: When slide / core is opened, pin gets into the retainer. "MTB" designed with over-travel, to avoid the damage by the wrong settle of the travel.
Operation continues even though there are mistakes (misalignments).
Important: The distance from the center of the dowel pin to the center of the shoulder screw is crucial / critical. The dowel pin installed in the slide positively locks into the retainer until disengaged by the mould closing motion. Designed with a efficient lead-in at the housing opening so the dowel pin will lead-in the housing even if there is a slight misalignment between the retainer and the pin.
