Filter the list by product size.
d (mm)
| d (mm) |
d1 (mm) |
d2 (mm) |
d3 (mm) |
d4 (mm) |
d5 (mm) |
L (mm) |
L1 (mm) |
L2 (mm) |
Product Code |
Price |
Stock |
3D |
Add to Cart |
|
M12 x 1.75
|
32
|
39
|
43
|
32
|
34
|
42.5
|
15
|
10
|
G1151M12175 |
|
|
|
|
|
M16 x 1.5
|
32
|
39
|
43
|
32
|
34
|
42.5
|
15
|
10
|
G1151M1615 |
|
|
|
|
|
M16 x 1.5
|
38
|
43
|
53
|
38
|
40
|
52
|
15
|
13
|
G1152M1615 |
|
|
|
|
|
M16 x 2.0
|
38
|
43
|
53
|
38
|
40
|
52
|
15
|
13
|
G1152M1620 |
|
|
|
|
|
M16 x 1.5
|
52
|
65
|
70
|
56
|
58
|
68
|
18
|
17
|
G1153M1615 |
|
|
|
|
|
M18 x 1.5
|
52
|
65
|
70
|
56
|
58
|
68
|
18
|
17
|
G1153M1815 |
|
|
|
|
|
M20 x 1.5
|
52
|
65
|
70
|
56
|
58
|
68
|
18
|
17
|
G1153M2015 |
|
|
|
|
|
M24 x 1.5
|
52
|
65
|
70
|
56
|
58
|
68
|
18
|
17
|
G1153M2415 |
|
|
|
|
|
M27 x 1.5
|
52
|
65
|
70
|
56
|
58
|
68
|
18
|
17
|
G1153M2715 |
|
|
|
|
|
M30 x 1.5
|
52
|
65
|
70
|
56
|
58
|
68
|
18
|
17
|
G1153M3015 |
|
|
|
|
Reliable Return of the Ejector Pins & Reliable Ejection of the Mouldings.
- Rapid and simple mounting (even within existing moulds).
- Engages in any position and disengages only after ejection has taken place.
- Can be used on any injection moulding machine with a hydraulic or mechanical ejector.
- Mounting times are very short, since the mould can be adjusted before it is fitted into the machine.
- For rapid and economic operation, up to 25–30 strokes per minute.
Material: 1.7147
Hardness: 60 HRC
1) The ejector plate is returned to the stop. Return screw and ejector screw disengage. Over theremainder of the closure movement, the jaws move without obstacle.
2) Mould in ejector position. The side splits are extended, the return pin is latched to the return coupling by meansof balls.
3) Mould closed. The injection operation begins.
