Filter the list by product size.
| L (mm) |
L1 (mm) |
L2 (mm) |
L3 (mm) |
L4 (mm) |
L5 (mm) |
L6 (mm) |
L7 (mm) |
L8 (mm) |
L9 (mm) |
L10 (mm) |
N (mm) |
N1 (mm) |
N2 (mm) |
N3 (mm) |
d (mm) |
E (mm) |
E1 (mm) |
E3 (mm) |
E4 (mm) |
R |
Ra |
T (mm) |
T1 (mm) |
T2 (mm) |
T3 (mm) |
T4 (mm) |
T5 (mm) |
Product Code |
Price |
Stock |
3D |
Add to Cart |
|
55
|
43
|
6
|
12
|
12
|
150
|
12
|
40
|
100
|
14
|
28
|
24
|
12
|
6
|
6
|
5
|
13
|
4
|
13
|
4
|
5
|
5
|
5
|
24
|
6
|
5.5
|
11.5
|
6
|
KAU55 |
|
|
|
|
|
67
|
53
|
7
|
15
|
14
|
200
|
16
|
50
|
150
|
18
|
36
|
32
|
16
|
8
|
8
|
6
|
16
|
5
|
18
|
5
|
6
|
6
|
6
|
32.5
|
10
|
6.5
|
16.5
|
10
|
KAU67 |
|
|
|
|
The unit is heat-treated. Safe and reliable with its double sided lock system. It is for two-stage (stripper plate) moulds. The unit can easily mounted due to its compact design. Opening priority of plates relates to the mounting direction of unit. During mounting, after selecting desired stroke, the otherLatch Bar is secured.
Parallel Mounting of Latch Lock Unit:
- Install the Housing parallel to the parting line face.
- Adjust or cut Latch Bar to required length.
- Open hole positions of screws, tight Latch Bar with screw on their position.
Complete adjusting position with compatible parts, form the dowel holes and fix the Latch Bar.
- Cut the Release Bar in required length and install it perpendicular to the mould. Make the overhang length "L" of each release bar the same for equal of release points on each sliding.
* At least 2 Latch Lock Units are required, which are respectively mounted at outer surfaces (center of the mould). Units must be mounted symmetrically in such a way as to prevent tilting of the plate.
IMPORTANT:
The operation test should be performed for your mould exactly. Please check motion sequence of bars and stripper plate. Fine adjustment is necessary. You should repeat this procedure until both Latch Locks work together exactly. The moving parts can be lubricated.
